Xylem IM234 R01 9K585 Moisture Sensor Relay - Manual (Page 3)

3
AQUAVAR SOLO AND BALANCED FLOW
Connections for Moisture Sensor (Part Number 9K585) for Balanced Flow, Aquavar SOLO and 3AB2, 5AB2;
ABII Controllers
S-DRIVE AND AQUAVAR SPD
AQUAVAR SOLO AND BALANCED FLOW
S-DRIVE AND AQUAVAR SPD
Connect White and Green wires
from Moisture Sensor to the termi-
nals 1 and 2 on controller.
Connect Red wire from Mois-
ture Sensor to the terminal
number 8 on controller.
Connect
Black wire
from Moisture
Sensor to
the terminal
number 9 on
controller.
Connect White
and Green wires
from Moisture
Sensor to the
RUN/STOP INPUT
marked "JUMPER
TO RUN" on con-
troller.
Connect Black wire from Moisture Sensor to
transducer terminal marked "B" on controller.
Connect Red wire from Moisture Sensor to
transducer terminal marked "R" on controller.