Xylem IM234 R01 9K585 Moisture Sensor Relay - Manual (Page 4)

AQUAVAR ABII OR AQUABOOST II AQUAVAR ABII OR AQUABOOST II
Connect Black wire
from Moisture Sensor
to terminal marked
"Com. (Blk)" on
controller.
Connect Red wire from
Moisture Sensor to
terminal marked "+5V
(Red)" on controller.
Connect Green wire
from Moisture Sensor
to terminal marked
"Input (Wht)" on
controller.
Connect White
wire from Moisture
Sensor to the White
wire of the pressure
transducer cable with
a wire nut
Xylem, Inc.
2881 East Bayard Street Ext., Suite A
Seneca Falls, NY 13148
Phone: (866) 325-4210
Fax: (888) 322-5877
www.xyleminc.com/brands/centripro
CentriPro is a trademark of Xylem Inc. or one of its subsidiaries.
© 2012 Xylem, Inc. IM234 Rev 1 July 2012