Xylem GLSSV2 SSV Series Vertical Multi-Stage Pumps D1 - Manual (Page 62)

60
Technical Data – Pump Hydraulics / Motor Sizing
66SV 2900 RPM
# of Impellers / Maximum HP Motor HP for use Shutoff TDH Shutoff TDH Casing / Sleeve Stages requiring Pump Flange
# reduced Draw with 1.15 SF (Feet) (Bar) Pressure rating Thrust Balancing Rating
Diameter Motor (@ 50 Hz) (Standard Assy.) Piston
6 41 564 16.8
6/1 39.1 40 545 16.3
6/2 37.3 528 15.8 Thrust Piston Class 250 / 300
5 34 469 14.0 Required
5/1 32.3 30 452 13.5
5/2 30.5 434 13.0
4 27.1 376 11.2
4/1 25.3 25 358 10.7
4/2 23.7 340 10.2 25 Bar (362 PSI)
3 20.5
20
282 8.4 1
3/1 18.7 264 7.9
Class 125 / 150
3/2 16.9 246 7.3
2 13.6 15 188 5.6
2/1 11.9 170 5.1
2/2 10.1 10 152 4.5
1 6.8 7.5 94 2.8
1/1 5.1 5 76 2.3
92SV 2900 RPM
# of Impellers / Maximum HP Motor HP for use Shutoff TDH Shutoff TDH Casing / Sleeve Stages requiring Pump Flange
# reduced Draw with 1.15 SF (Feet) (Bar) Pressure rating Thrust Balancing Rating
Diameter Motor (@ 50 Hz) (Standard Assy.) Piston
6 53.3 610 18.21
6/1 51 50 594 17.73
6/2 48.7 577 17.23 Thrust Piston Class 250 / 300
5 44.4 509 15.20 Required
5/1 42.1
40
492 14.69
5/2 40 475 14.18
4 35.5 407 12.15
4/1 33.2
30
390 11.64
4/2 31 374 11.17 25 Bar (362 PSI)
3 26.6
25
305 9.11 1
3/1 24.3 289 8.63
Class 125 / 150
3/2 22
20
272 8.12
2 17.8 204 6.09
2/1 15.5
15
187 5.58
2/2 13.1 171 5.11
1 9 10 102 3.05
1/1 6.8 7.5 85 2.54
1 Pump assembly may be modified for 40 bar (580 psi) application – contact factory.
Pump Number of Stages Max. Inlet Pressure
1SV
2-16 Stages
17-22 Stages
2SV
2-25 Stages
16-22 Stages
3SV
2-13 Stages
14-16 Stages
250 psi (17 bar)
4SV
2-10 Stages
11-12 Stages
33SV 1-10 Stages
46SV 1-10 Stages
66SV 1-6 Stages
92SV 1-6 Stages
Maximum Inlet Pressure
The following table shows the maximum permissible inlet
pressure. However, the actual inlet pressure + pressure
against a closed valve must always be lower than the
maximum permissible operating pressure.
(Refer to pressure/temperature curves on page 13 to verify
MAWP of pump)