Xylem Lab 850, up to serial number 09470314 - Manual (Page 31)

Lab 850 Operation
31 ba75553e03 01/2006
4.5 Settings
You can adapt the meter to your individual requirements. The settings
are done in the following menus:
! System settings (<OK
_
>)
– Switch-off interval (t.Off)
– Date (Day.Month)
– Date (Year)
– Time (Time)
! Settings for calibration and measurement (<MODE
_
>)
– Number of the buffer set for pH calibration (Set 1 ... 16)
– Display of the buffer during calibration
(pH nominal value or measured voltage value in mV)
– Unit of the value for the slope (mV/pH or %)
– Unit of the value for the zero point (mV, pH)
– Resolution (Hi, Lo)
– Temperature unit (°C / °F)
– Calibration interval (Int.C [0 ... 999])
Note
You can exit the setting menu at any time by pressing <MODE>.
Settings already modified and confirmed with <OK> are stored.