Xylem HandyLab 780 - Manual (Page 50)

50
pH Oxy Cond
Information
Calibration Record
Shows the data of the last calibration performed on the currently connected
sensor.
pH Cond Oxy ISFET ORP Optical
Oxy
Manufacturer
Order no.
Sensor serial no.
Cap serial no.
SW version
HW version
Calibration*
)
Zero point
Slope
Sensor operating
time
Cap operating time
Wear
SIP
CIP
Cell constant
Operating point
ORP correction
*) Last calibration
1) In measuring mode, press the Menu softkey.
2) Select “Information” and confi rm by pressing enter.
3) Select the desired submenu and confi rm by pressing enter.
The different submenus are described below.
Sensor Information (Digital Sensors only)
Shows the data of the currently connected digital sensor. You can save sensor
data (MemoLog) in the device by pressing the “Save” softkey. The following
table shows the sensor information depending on the respective sensor
type: