3 commissioning, 1 scope of delivery, 2 power supply – YSI TruLab pH 1110 User Manual
Page 10: 3 initial commissioning, 1 inserting the batteries, Commissioning, Scope of delivery, Power supply, Initial commissioning, Inserting the batteries
Commissioning
TruLab pH 1110
10
ba76155e01
03/2014
3
Commissioning
3.1
Scope of delivery
• TruLab pH 1110 meter
• 4 batteries 1.5 V Mignon type AA
• Power pack
• Stand
• Stand holder
• Short instructions
• Detailed operating manual (4 languages)
• CD-ROM with detailed operating manual
3.2
Power supply
The TruLab pH 1110 is supplied with power in the following ways:
• Mains operation with the supplied power pack.
• Battery operation (4 x alkaline manganese batteries, type AA)
3.3
Initial commissioning
Perform the following activities:
• Insert the supplied batteries
• Connect the power pack (mains operation)
• Mount the stand
• Switch on the meter
3.3.1
Inserting the batteries
You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH).
In order to charge the batteries, an external charging device is
required.