Xylem H-2192 - Manual (Page 12)

2.3 Back Panel Connections
2.3.1 Power Connection
The two pins on the right side of the green terminal strip allows for an easy power connection. It
is important to use a heavy gauge wire (18 gauge or heavier) for power connections. If the RF
radio is also used with this modem then the heavier gauge wire may be required. The power
connections are clearly labeled on the instrument housing.
2.3.2 Alarm Connection
The two pins on the left side of the green terminal strip allows for an easy connection to some
external device that may signal an alarm condition. The alarm connections are clearly labeled on
the instrument housing.
Figure 2.1 H-219X Back Panel Connections
2-2 Installation
H-219X