Xylem H-340SDI - Manual (Page 26)

2-12 SDI-12 Command and Response Protocol
H-340SDI
Example of a H340SDI extended "Write Offset" command:
Command Response Tim Values Description
------------- --------------------- ------- -------- -------------------------------
"aXWO1.234!" "a0011<cr><lf>" 1 sec 1 Set offset to 1.234
Subsequent Command Response
--------------------------- ------------------------------------
"aD0" a+123.4<cr><lf>
This command takes 001 seconds to complete and places 1 value in the data buffer. Use the “aD0"
command to collect and view the data.
2.14 Extended “Get Time” Command
The H-340SDI has a built-in real time clock. This command allows the user to read the current time
of day.
Command Response Description
------------- ------------------------- -----------------------------
"aXGT!" "a0013<cr><lf>" Read time of day
Where:
a is the sensor address ("0-9", "A-Z", "a-z", "*", "?").
XGT are upper case characters
This command takes 001 seconds to complete and places 3 values in the data buffer. Use the “aD0"
command to collect and view the data.