Xylem H-340SDI - Manual (Page 27)

H-340SDI
SDI-12 Command and Response Protocol 2-13
Example of a H340SDI extended "Get Time" command:
Command Response Time Values Description
------------- --------------------- ------- -------- -------------------------------
"aXGT!" "a0013<cr><lf>" 1 sec 3 Get current time of day
Subsequent Command Response
--------------------------- ------------------------------------
"aD0" a+HH+MM+SS<cr><lf>
Where:
HH = Hours (24 hour format)
MM = Minutes
SS = Seconds
2.15 Extended “Set Time” Command
The H-340SDI has a built-in real time clock. This command allows the user to change the current
time of day.
Command Response Description
------------- ------------------------- -----------------------------
"aXSTHHMMSS!" "a0013<cr><lf>"
Set time of day
Where:
a is the sensor address ("0-9", "A-Z", "a-z", "*", "?").
XST are upper case characters.
HHMMSS is the new time in Hours:Minutes:Seconds (24-Hour format)
This command takes 001 seconds to complete and places 3 values in the data buffer. Use the “aD0"
command to collect and view the data.