MJK Automation Shuttle Ultrasonic Level Transmitter and Sensor - Manual (Page 60)

60 GB Shuttle Manual 100316 SW 838023
Appendix
Use the arrow keys to select:
Confirm the new setting:
Shuttle ® is ready for a new selection of a password protect-
ed menu after pressing 'Enter'.
(Re-entering the access code is not necessary if a menu
selection is made within 5 minutes.)
Press 'Escape' if no further password protected menu
selections are needed …
... or confirm with 'Enter' that the changes should be saved,
whereupon Shuttle
® revert to normal read-out, and the next
password protected menu can be selected.
(Press 'Escape' if the changes should not be saved.)
Find zero level at next power-up
Enter the access code (see page
58 ) and press 'B':
This menu is used to force Shuttle ® to start up with an auto-
matic zero level setting at the next power-up. (See page 14 .)
The function is useful if ie. Shuttle ® has been build into a
control panel and has been set-up for a particular applica-
tion. Shuttle
® will then start up as it would when delivered
from the factory, but the selected functions and setpoints will
not be reset.