YSI pH10A - Manual

EcoSense ® pH10A pH/Temperature Pen
Operations Manual
EcoSense pH10A OVERVIEW
A. Description
1. Battery cap
2. Graphic LCD screen
3. Keypad
4. Belt clip (Do not remove screw.)
4. Electrode collar
5. Electrode & ATC assembly – outside o-ring on
electrode is yellow and inside o-ring is black.
(Electrode cap shown covering electrode.)
B. EcoSense pH10A Keypad Layout
INITIAL INSPECTION AND ASSEMBLY
Carefully unpack the instrument and accessories, and inspect for shipping damages. Notify
your local dealer or YSI immediately (+1 937-767-7241 or [email protected]) of any
damages or missing parts. Save packing materials until satisfactory operation is confirmed.
BEFORE USING
A. Insert the Batteries
1. Remove the battery cap at the top of the unit.
2. Insert the set of batteries (included) ensuring correct polarities.
3. Securely replace battery cap.
B. Soak the Electrode
1. Remove the electrode cap covering the pH10A meter electrode.
2. Soak electrode in pH 4 buffer for 10 minutes before first use or after storage .
Hold – On/Off key
Store key
Calibration key
Scroll key