YSI pH10A User Manual
Page 4
pH
Buffer recognition
pH 7.00, 4.01, 10.01 or pH 6.86, 4.00, 9.18
Temperature compensation
AUTO 0.0 to 100.0 °C (32.0 to 212 °F)
Buffer temperature range
0.0 to 60.0°C (32.0 to 140 °F)
Electrode offset
±90 mV at pH 7.00 +98.3 mV / -81.7 mV at pH 6.86
Electrode slope
±30% at pH 4.00, 4.01, 9.18 and 10.01
Input impedance
>10
12
Ω
Temperature
Temperature sensor
Thermistor, 10 k at 25°C
General
Battery life
Meter: > 200 Hours
Ambient temperature range
0.0 to 50.0 °C
Display
98x64 graphic LCD
Case
IP67 water-tight case
Weight
105 g (3.7 ounces)
REPLACEMENT PARTS
Item Number
Description
605112 REF
Instruction Manual
606110
pH10A Electrode Replacement Kit (Includes electrode, electrode collar, 2
o-rings, and sensor cap)
606116 Sensor
Cap
609118
Battery Compartment Kit (Includes battery cover and battery gasket)
605118
Battery Kit (Includes 4 batteries)
WARRANTY
The EcoSense pH10A Instrument is warranted for one year from date of purchase by the end user against
defects in materials and workmanship. EcoSense pH10A electrodes are warranted for six months from date
of purchase by the end user against defects in material and workmanship. Within the warranty period, YSI
will repair or replace, at its sole discretion, free of charge, any product that YSI determines to be covered by
this warranty.
To exercise this warranty, write or call your local YSI representative, or contact YSI Customer Service in
Yellow Springs, Ohio. Send the product and proof of purchase, transportation prepaid, to the Authorized
Service Center selected by YSI. Repair or replacement will be made and the product returned, transportation
prepaid. Repaired or replaced products are warranted for the balance of the original warranty period, or at
least 90 days from date of repair or replacement.
Limitation of Warranty
This Warranty does not apply to any YSI product damage or failure caused by: (i) failure to install, operate or
use the product in accordance with YSI's written instructions; (ii) abuse or misuse of the product; (iii) failure to
maintain the product in accordance with YSI's written instructions or standard industry procedure; (iv) any
improper repairs to the product; (v) use by you of defective or improper components or parts in servicing or
repairing the product; or (vi) modification of the product in any way not expressly authorized by YSI.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. YSI's LIABILITY UNDER THIS WARRANTY IS
LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AND THIS SHALL BE YOUR SOLE AND EXCLUSIVE
REMEDY FOR ANY DEFECTIVE PRODUCT COVERED BY THIS WARRANTY. IN NO EVENT SHALL YSI BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECTIVE
PRODUCT COVERED BY THIS WARRANTY.
Contact Information
YSI Inc. • 1725 Brannum Lane • Yellow Springs OH, 45387
800-897-4151 (USA only) • +1 937-767-7241 • Fax: 937-767-1058
Email:
• Website:
www.ysi.com