Xylem WMX101-Series ELECTROMAGNETIC FLOW METERS - Manual (Page 5)

SPECIFICATIONS
Page 3
3”,4”, 6”, 8”, 10”
ANSI 150 lb. drilling
150 psi (10.3 bar) working pressure
10˚ to 130˚ F (-12˚ to 54˚ C)
-40˚ to 158˚ F (-40˚ to 70˚ C)
+/- 1% of reading for flow between 10% to 100% of max flow
+/- 2% of reading for flow from cutoff to 10% of max flow
Ductile cast iron, powder coated w/NSF61 listed epoxy powder
Welded steel, epoxy-coated
Noryl®
Dual durometer rubber
Diecast aluminum, powder-coated (non-IP68)
Ductile Cast Iron (IP68)
316 stainless steel
EPDM
Rate Total
5
8
Gallon/Minute, Liter/Minute, Liter/Second, Gallon, Gallon x 1000, Liter, Liter x 1000, Mega Liter,
Cubic Feet/Minute, Cubic Meter/Hour, Cubic Meters, Cubic Meter x 1000, Cubic Feet,
Million Gallon/Day, Mega Liter/Day Cubic Feet x 1000
WMX101: 8-32 Vdc at 30 mA max, with auxiliary battery for continuous operation during power failures
NOTE: Using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
WMX104:
2 Lithium 3.6V “D” batteries, replaceable, 1 year life under continuous use.
WMX101: Current sinking pulse, opto-isolated, 30 Vdc at 10 mA max
WMX104: Pulse output available only with addition of post-factory output cable
High Frequency (default); 10 units/pulse; 100 units/pulse; 1000 units/pulse
3” 4” 6” 8” 10”
25.228 16.362 6.307 3.344 2.150
6.665 4.323 1.666 0.883 0.568
>20 microSiemens/cm
Hardware/software, conductivity-based
NEMA 4X Standard (IP68/NEMA 6P Option)
Pipe Sizes
Fittings
Pressure
Temperature Operating
Non-Operating
Accuracy
Materials Body (3” Only)
Body (4”-10”)
Liner (3” Only)
Liner (4”-10”)
Electronics Housing
Electrodes
O-ring (3” Only)
Display
Digits
Units
Power
Pulse Output Signal
Pulse Rates
High Frequency
Pulse/Gal
Pulse/Liter
Conductivity
Empty Pipe Detection
Environmental
SPECIFICATIONS*
*Specifications subject to change. Please consult our website for the most current data (www.seametrics.com).
FLOW RANGE (3” - 10”)
Meter
Size
3” 4” 6” 8” 10”
Gal/Min Liter/Sec Gal/Min Liter/Sec Gal/Min Liter/Sec Gal/Min Liter/Sec Gal/Min Liter/Sec
Minimum 7.5 .47 12 .75 32 2 60 3.8 95 6
Maximum 700 44.2 1,000 63 2,400 151.4 4,400 277.6 7,000 441.6