Xylem VARIO COND TEMPERATURE CONDUCTIVITY METERS - Manual (Page 34)

Operation VARIO Cond
34
4.9.3 Erasing measured data from the memory
To erase all datasets proceed as follows:
5 If necessary, display further elements of the dataset (ID number,
date, time, temperature) with <
§_ > [element of the measurement
dataset].
6 Switch to the measuring mode with < E >.
1 Display the memory with < M_ >.
The W status indicator appears on the display.
The measured value that was saved last is displayed.
2 Erase the entire memory with < D >.
A security prompt appears.
3 Confirm the deletion with < g >.
After the deletion, NO DATA appears on the display.
4 Switch to the measuring mode with < E >.