Xylem ProLab 3000 LABORATORY pH METER User Manual
Page 70
Advertising
pH
ProLab 3000
70
ba75645e02
01/2010
Criteria
With identical measurement conditions, the following applies:
Note
You can terminate prematurely the Stability control function with
<OK> manually at any time. If the Stability control function is termi-
nated prematurely, the current measurement data is not downloaded
to the interface.
5
Using <SC> or <MODE>, release the frozen measured value.
The [SC] status display disappears.
Measured param-
eter
Reproducibility
Response time
pH value
Better than 0.01
> 15 seconds
Advertising