Xylem photoLab 6xxx Car Adapter - Manual (Page 6)

Car Adapter photoLab
®
6xxx
4 ba75758de03 08/2009
Safety instructions For operation with an external battery, follow the safety instructions of the
battery.
Make sure the power source is suitable for operation of the spectrophotome-
ter (see technical data of the power source and technical data of the spectro-
photometer).
Operating time
with a battery
The maximum operating time depends on various factors:
z Battery (e.g. nominal capacity, condition, age)
z Operating mode of the photometer (e.g. frequency of measurements)
z Photometer (instrument type)
Example:
Operating time
with a battery
of the type
12 V / 19 Ah
Note
The spectrophotometer consumes electricity even while it is in standby
mode.
We recommend to disconnect the Car Adapter photoLab
®
6xxx if you do not
use the spectrophotometer during battery operation.
Technical data
Car Adapter
photoLab
®
6xxx
Instrument type Operating time with the battery
in optimum condition
photoLab
®
6100 VIS approx. 6.5 h
photoLab
®
6600 UV-VIS approx. 16 h
Cable length 2 m
Max. voltage 12 V
Max. current 8 A