Troubleshooting – Extron Electronics CD 100 User Manual
Page 17
15
© 2000 - INLINE, Inc. CD100 / CD110 Court Director™ System Operation Manual - V. 1.0 11/30/2000
Optional Accessories
VGA Monitor Adapter and Extension Cables
IN8000 Series: 15-pin HD male to 15-pin HD female, lengths from 3’ to 250’
IN8000M Series: 15-pin HD male to 15-pin HD male, lengths from 3’ to 250’
For Other Computers: Refer to the Adapter / Extension Cables Chart on page 5
Connector Cables
IN9139 Series: Status Display Link Cable - Connects CD100 to CD110, 9-pin D Male to 9-pin D
male (available in a variety of lengths)
Audio Cables
IN9106: 3.5mm stereo mini to 3.5mm stereo mini (M-M), 6’ long
IN9107: (1) 3.5mm stereo mini male to (2) RCA male, 6’ long
IN8700 Series: Stereo audio cable (2) RCA (M-M), lengths from 6’ to 25’
Powered Accessories
IN1100 / IN1110: Twisted Pair Video Transmission System
IN1403 / IN1404: Video Scalers
Troubleshooting
Problem: One of the display devices has no image.
Solution 1: Verify that the device’s power switch is turned on and that the power cable is
securely plugged into the A/C source.
Solution 2: Verify the connection to the display device.
Solution 3: Verify that the output device is compatible with the horizontal scan rate output
by the computer video card.
Problem: There is no image on any of the display devices.
Solution 1: Make sure that the IN9230 IEC power cable is securely plugged into the CD100
and the A/C source.
Solution 2: Make sure the A/C source is live.
Solution 3: Verify that the power switch is turned on for the video source, the CD100 and all
display devices.
Solution 4: Verify the connections to all the output display devices.
Solution 5: Verify that the data projector, monitor or other output device is compatible with
the horizontal scan rate output by the computer video card.
Problem: There is no audio output.
Solution 1: Verify that power is present and that the power switch is turned on for the audio
source, the CD100 and the mixer / amplifier.
Solution 2: The audio output of the CD100 is line level audio only. It should be connected
to a mixer / amplifier or other audio unit that accepts a line level input.
Solution 3: Increase the volume using the volume UP button.
Solution 4: The mute may be activated. Press the Mute Button to deactivate the function.
Problem: The LED’s on the CD110 do not illuminate and the Override Button is not responding.
Solution: Verify that the DB-9 cable is connected properly.
If problems persist, call INLINE Technical Services at (714) 921-4100 for further assistance.