Extron Electronics Annotator User Guide - Manual (Page 98)

Images page
This page allows images (.bmp format) to be added to or deleted from the Annotator,
previewed, and recalled to be shown on a connected display device.
Figure 57. Images Page
To add an image, click Add , browse to the image location on the connected PC, and click
Upload Image . The image is uploaded to the Annotator and a thumbnail of the image is
viewable on the Images page (see the figure above).
NOTE: The image is not yet displayed.
To preview an image without displaying it, click on the thumbnail.
To display an image click on a thumbnail image and then click Recall. The image is
displayed. If no image appears on the display device, check the input selected and image
format is correct.
To delete an image click on a thumbnail and then click
Delete. The image is deleted
from the Annotator files.
Annotator • HTML Operation 92