Extron Electronics DP DA2 User Guide User Manual
Page 25
9.
On the Open window, navigate to the new firmware file, which has an S19 extension,
and double-click it.
Figure 11.
Open Window for Firmware File Selection
ATTENTION: Valid firmware files must have the file extension S19. A file with any
other extension is not a firmware upgrade for this product and could cause the
switcher to stop functioning.
NOTES:
•
The original factory-installed firmware is permanently available on the
DP DA2. If the attempted firmware upload fails for any reason, the DP DA2
reverts to the factory version.
•
When downloaded from the Extron website, by default the firmware is
placed in a folder at
C:\Program Files\Extron\Firmware\DP DA2
(Windows XP) or
C:\Program Files (x86)\Extron\Firmware\DP DA2
(Windows 7).
DP DA2 • Updating Firmware
19