Extron Electronics EDID 101H User Guide - Manual (Page 27)

EDID 101H • Reference Information 21
4. On the Add Device dialog, select EDID 101H from the Device Names drop-down list.
5. From the Connection Method drop-down list, select USB .
6. Click Connect . If the connection is successful, EDID 101H is displayed in green in the
Connected Device panel, followed by a green check mark.
USB
EDID 101H
EDID 101H
Connect
Connected Device
Device Name: EDID 101H
Add
New Firmware File (Optional)
Path: Browse
4
5
6
7
Figure 13. Add Device Dialog
7. To upload the firmware file, in the New Firmware File (Optional ) panel, click Browse .
The file browser opens.
8. Navigate to the new firmware file, which has an S19 extension, and double-click it.
EDID 101H
edid_101h_v1.00.0011_071213.S19
edid_101h_v1.00.0011_071213.S19
Figure 14. Open Dialog for Firmware File Selection
ATTENTION: Valid firmware files must have the file extension S19 . A file with any
other extension is not a firmware upgrade for this product and could cause the
EDID 101H to stop functioning.