Introduction, About this guide, About the edid 101h – Extron Electronics EDID 101H User Guide User Manual
Page 7: Edid 101h features
EDID 101H • Introduction
1
Introduction
This section describes this user guide and the EDID 101H, including:
•
•
•
•
About this Guide
This guide contains information about the Extron EDID 101H with instructions on how to
install, configure, and operate the unit. Throughout this guide the EDID 101H is referred to
as the “EDID 101” or the “device”.
About the EDID 101H
The Extron EDID 101H is an HDCP compliant EDID Emulator for HDMI signal sources.
It features EDID Minder, an Extron exclusive technology designed to provide automatic
and continuous Extended Display Identification Data (EDID) management. EDID Minder
ensures that the source powers up properly and reliably outputs content. Pre-stored EDID
is communicated to the source based on a user-selected resolution and refresh rate. The
EDID 101H can also capture and store EDID information from a connected display. A unique
Hot Plug Detect (HPD) port provides control for remote cameras and other signal sources
that require a periodic HPD trigger.
The EDID 101H is housed in a compact one-inch high, quarter rack width enclosure
for convenient, discreet installation (see
on page 15). An
energy-efficient external universal power supply is included.
EDID 101H Features
EDID Minder — Automatically manages EDID communication between connected
devices. EDID Minder ensures that all sources power up properly and reliably output content
for display.
Selectable resolutions and refresh rates — Pre-stored EDID is communicated to the
source based on a user-selected resolution and refresh rate.
EDID capture mode — When connected to a display, the EDID 101H offers the option of
capturing and then storing EDID information from the display device.
Supports computer video to 1920x1200, including HDTV 1080p60 and 2K.
HDCP compliant — Fully supports HDCP-encrypted sources.
HDCP authentication and signal presence LED indicators — Provide signal status for
real-time feedback and monitoring of key performance parameters.
HDMI to DVI Interface Format Correction — Automatically reformats HDMI source
signals for output to a connected DVI display.