Extron Electronics Fox Tx_Rx AV User Guide - Manual (Page 21)

Command and Response Table for SIS Commands
Command ASCII
Command
(host to unit)
Response
(unit to host)
Additional description
Input video format
Specify input setting
X! \ Typ X!] Sets format of input video signal
(X!)
0 = Auto 4 = Component
5 = S-Video 6 = Composite
View current input setting \ X!] Displays current input video format.
Adjust color
Specify color value
X@ C Col X@] Sets color value for video signal (X@
from 0 to 127).
Increment color value +C Col X@] Increases color value by 1.
Decrement color value -C Col X@] Decreases color value by 1.
View current color value C X@] Displays current color value.
Adjust tint
Specify tint value
X@ T Tin X@] Sets tint value for video signal (X@
from 0 to 127).
Increment tint value +T Tin X@] Increases tint value by 1.
Decrement tint value -T Tin X@] Decreases tint value by 1.
View current tint value T X@] Displays current tint value.
Adjust contrast
Specify contrast value
X@ ^ Con X@] Sets contrast value for video signal
(X@ from 0 to 127).
Increment contrast value +^ Con X@] Increases contrast value by 1.
Decrement contrast value -^ Con X@] Decreases contrast value by 1.
View current contrast value ^ X@] Displays current contrast value.
Adjust brightness
Specify brightness value
X@ Y Brt X@] Sets brightness value for video
signal (X@ from 0 to 127).
Increment brightness value +Y Brt X@] Increases brightness value by 1.
Decrement brightness value -Y Brt X@] Decreases brightness value by 1.
View current brightness value Y X@] Displays current brightness value.
Video mute
Enable blanking
1B Blk1 ] Blanks selected input (X#).
0 = Disables blanking or mute.
1 = Enables blanking or mute.
Disable blanking 0B Blk0 ] Displays selected input.
View current blanking status B X#] Displays current blanking status.
FOX Tx/Rx AV • Configuration 15