Composite video connections, Chapter 2 • rear panel connections – Extron Electronics Matrix 100 Switcher User Manual

Page 20

Advertising
background image

Extron • Matrix 100 • User’s Manual

Chapter 2 • Rear Panel Connections

Composite Video Connections

NTSC and PAL are television or VCR type signals on a single coax cable, which
may or may not have stereo audio. For this application, the Matrix 100 uses one
Composite Video module, shown in Figure 2-6 in the right-most position.

Connect the output of an NTSC/PAL video source to a Video module input. (See
illustration below.) Connect the video output from the Matrix to a destination
device that uses Composite Video.

________ NTSC - National Television Standards Committee

PAL - Phase Alternation Line

Figure 2-6. Composite Video with Right & Left Audio

_______ Audio Connections may or may not be used. See page 2-9 for wiring.

2-6

1

2

3

4

3

Advertising