Extron Electronics IN1608 MA User Guide - Manual (Page 29)

IN1606 and IN1608 Series Scaling Presentation Switcher • Operation 23
Resolution — Press the Navigation buttons to change the resolution and refresh rate from
the select list. The following table shows the available resolution and refresh rates.
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz 75 Hz
640x480 X X X
800x600 X X X
852x480 X X X
1024x768 X X X
1024x852 X X X
1024x1024 X X X
1280x768 X X X
1280x800 X X X
1280x1024 X X X
1360x765 X X X
1360x768 X X X
1365x768 X X X
1366x768 X X X
1365x1024 X X X
1440x900 X X X
1400x1050 X X
1600x900 X X
1680x1050 X X
1600x1200 X X
1920x1200 X X
480p X X
576p X
720p X X X X X X*
1080i X X X
1080p X X X X X X X X
2K (2048x1080) X X X X X X X X
Custom 1 through 8 For captured or uploaded EDID tables
* Default
NOTE: The eight custom, user-defined output rates default to 720p @ 60 Hz when no
custom EDID is captured or uploaded.
HDMI or DTP Output Format — After selecting HDMI “A” Format, HDMI “B” Format, or
DTP “C” Format (IN1608 models only) from the list of submenus, press the Navigation
buttons to set the output format. The following formats are available:
• Auto (based on display EDID) • DVI RGB 444 • HDMI RGB 444 Full
• HDMI RGB 444 Limited • HDMI YUV 444 Full • HDMI YUV 444 Limited
• HDMI YUV 422 Full • HDMI YUV 422 Limited
HDCP Notification — Press the Navigation buttons to enable or disable an HDCP
compliance notification. When the HDCP notification is enabled or On and an
HDCP-encrypted input is sent to a display that is non-compliant, a green background is
displayed with a moving message reading “HDCP Content.” If HDCP notification disabled or
Off, a black or muted output is displayed.