Extron Electronics IPI 200 Series User Guide - Manual (Page 42)

HelpDesk Software, cont’d
IPI 100 and IPI 200 Series • HelpDesk Software 5-8
Configuring an IP device with the configuration utility
1. Open the configuration utility and select one of the IP devices in the Intercom
List.
2. When it is highlighted, its information is displayed in the Selected Intercom
pane:
3.
In the Selected Intercom pane, the unit’s Administrator Password and the
IP addresses associated with each of the four buttons on the intercom can be
changed.
4. Click Apply to save the changes.
5. Click exit to close the Configuration Utility.