Extron Electronics IPI 200 Series User Guide - Manual (Page 52)

IPI 100 and IPI 200 Series • Specifications, Part Numbers, Accessories A-2
Specifications, Part Numbers, Accessories
Specifications — IPI 100 Series
Audio— IPI 101, IPI 104 and MLC 226 IP
Speaker ........................................... 1.4" (35.6 mm), 1‑way, indoor
Frequency response
Line level output (MLC)... 20 Hz to 3.3 kHz, ±1 dB
Speaker output (IPI) .......... 300 Hz to 3.3 kHz, ‑10 dB
Nominal sensitivity/IPI speaker output level
80 dB SPL, 300 mW, 3' (1 m)
Processing
Audio format ..................... PCM, µ‑law companded
Sampling rate ..................... 8 kHz
Sample size ......................... 16 bit, µ‑law companded to 8 bit
Audio latency..................... <100 ms
Audio input— IPI
Number/signal type ..................... 1 mono, via integrated electret microphone
Microphone gain ........................... ‑30 dB to 0 dB, adjustable in 2 dB steps
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ..................... 2 mono: 1 via MLC 226 IP, 1 via IPI speaker
Line level (MLC) ............................ ‑10 dBV (316 mVrms), unbalanced (via 3.5 mm captive screw connector,
2 pole)
Amplified speaker (IPI) ................ 300 mW, continuous, 1% THD
Ethernet control interface via MLC 226 IP
Ethernet control/communications port
1 female RJ‑45 connector
Ethernet data rate/transport bandwidth
80 kbps
Communications type .................. Half duplex
Protocol ........................................... IP (control), TCP (control), UDP (port 3121, audio), Telnet
Program control (via MLC).......... Extron control/configuration program for Windows
®
Extron Simple Instruction Set (SIS ™ )
Microsoft ® Internet Explorer, Telnet
General
Power .............................................. Supplied by an MLC 226 IP
Power input requirements ........... +12 VDC, <100 mA
Distance between MLC 226 IP and an IPI
100' (30.5 m), maximum
Connection type (IPI–MLC)......... RJ‑45 jacks with CAT 5, CAT 5e, or CAT 6 cable
Temperature/humidity ................ Storage: ‑40 to +158 °F (‑40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ........................................... Convection
Mounting
Rack mount ........................ Yes, with optional faceplate
Furniture mount ................ Also furniture‑ and wall‑mountable with optional faceplate or in an
MLC 226 IP AAP faceplate
Enclosure type ............................... Metal faceplate