Extron Electronics ImageStar HD - Manual (Page 48)

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 48 I460GB issue 4
To update the Network Settings of an ImageStar HD…
In the Network window, click the Local Name of the required device.
Click the Network menu and choose Update.
The
Commands dialog will appear, showing a list of commands that will be sent to the
ImageStar HD device:
If required, you can prevent a command from being sent by deselecting the checkbox next to
the command line.
HINT: Clicking the Export button saves the ‘checked’ commands into a text file.
To send the selected commands, click OK.
The following message will appear:
Click OK and, when you are ready to do so, reboot the device (see page 41).
IMPORTANT NOTE: Remember that the control connection established between ImageStar
Configuration and the ImageStar HD is not maintained following a reboot operation. Therefore,
you will need to ‘disconnect’ then ‘reconnect’ to the device to restore the connection.