Extron Electronics ImageStar HD - Manual (Page 51)

IMAGESTAR HD USER GUIDE Section 3: Configuration
I460GB issue 4 Page 51
Setting-up the Display Outputs
Setting the Output Mode
Setting the Output Mode determines the signal type that the ImageStar HD outputs to the display
devices. It also defines the size/resolution of the screen icons in the Wall Layout window.
Click on the Wall Layout window to highlight it.
Click the Layout menu and choose Set Resolution.
The
Screen Resolution dialog will appear:
Select the appropriate Output mode for driving your display devices.
If required, choose GenLock mode and specify any Overscan settings.
HINT: Overscan settings can also be adjusted interactively (see page 60).
Click the OK button.