Extron Electronics ImageStar HD - Manual (Page 52)

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 52 I460GB issue 4
Adding Screens to the Wall Layout
The Wall Layout provides a representation of the target display. One screen is required for each
display device in the target display and these must be positioned and aligned to match the real
display.
Click the button to select the Screen Layer.
Click the button to select Add Screen mode.
Click in the Wall Layout window – each click will add a new screen to the layout.
To turn off Add Screen mode, click the button.
Move each screen into the required position by dragging it with the mouse or by using the
keyboard arrow keys.
NOTE: The arrow keys move the screen in increments of 10 pixels.
To delete a screen from the layout, click on it and press the Delete key (or choose Delete
from the Edit menu).
To precisely adjust a screen position, double click a screen to open its Properties dialog (or
choose Properties from the Edit menu).
Adjust the Top and Left pixel coordinates as required, and click OK.
NOTE: Pixel coordinates are measured from the extreme top left corner of the Wall Layout
window, i.e. Top=0, Left=0. Pixel coordinates sent to the ImageStar HD are relative to
the top-left corner of the associated source clip.
Click the OK button.