Extron Electronics ISS 408 - Manual (Page 54)

ISS 408 Integrated Seamless Switcher • Programming Guide 48
Command and Response Table for IP SIS Commands
Symbol definitions
X3) = ISS name (Up to 240 alphanumeric characters)
NOTE: The following characters are invalid or not recommended in the name: {space} + ~ , @ = ` [ ] { } < > ‘ “ ” ; : | \ and ?.
X3! = GMT date and time (for set) In the format: MM/DD/YY•HH:MM:SS where:
MM = month:
01 (Jan) through 12 (Dec)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 23
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X3@ = Date and time (for read) In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where:
Day = weekday:
Mon through Sun
DD = date: 01 through 31
Mmm = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X3# = IP address nnn.nnn.nnn.nnn
X3$ = Password 12 alphanumeric characters
X3% = Hardware (MAC) address nn-nn-nn-nn-nn-nn
X3^ = Number of open connections 0 – 255
Command and response table
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Set ISS name (location) EX3) CN } Ipn• X3)]
Read ISS name (location) ECN } X3)]
Set GMT/date EX3! CT } Ipt• X3@]
NOTE: The date and time entered should be Greenwich Mean Time (GMT).
Read GMT/date E CT } X3@]
Set IP address EX3# CI } Ipi• X3#] The switcher sends the response, but
the host may not receive it.
Read IP address ECI } X3#]
Read hardware address ECH } X3%]
Read # of open connections ECC } X3^]
Set administrator password E • X3$ CA } Ipa• X3$]
Read administrator password E CA } X3$]
Set user password E • X3$ CU } Ipu• X3$]
Read user password E CU } X3$]
NOTE: When the computer is connected to the switcher via the RS-232 link, the Admin and User password fields are not masked. If a
password has been inadvertently changed to an unknown value, you can look up and, if desired, change a password in this window
without knowing the current password.