Html operation, Loading the startup (control) page – Extron Electronics ISS 408 User Manual

Page 63

Advertising
background image

ISS 408 Integrated Seamless Switcher • HTML Operation

57

HTML Operation

This section describes

•

Loading the Startup (Control) Page

•

Control Page

•

System Configuration Page

•

File Management Page

•

I/O Configuration Page

The ISS 408 can be controlled and operated through its Ethernet port, connected via a
LAN or WAN, using a Web browser such as the Microsoft

®

Internet Explorer

®.

This chapter

describes the factory-installed HTML pages, which are always available and cannot be
erased or overwritten.

NOTE: If your Ethernet connection to the ISS is unstable, try turning off the proxy server

in your Web browser. In Internet Explorer, click

Tools

>

Internet Options

>

Connections

>

LAN Settings

, uncheck the

Use a proxy server...

box, and

then click

Ok

.

Loading the Startup (Control) Page

Access the switcher using HTML pages as follows:

1.

Start the Web browser program.

2.

Click in the Address field of the browser.

3.

Type the switcher’s IP address in the browser’s Address field.

NOTE: If the value has not been changed, the factory-specified default,

192.168.254.254, is the correct value for this field.

4.

If you want the browser to display a page other than the default page (such as a custom
page that you have created and uploaded), enter a slash (/) and the name of the file to
open.

NOTES:

•

The browser’s Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}

•

The following characters are invalid in file names: {space} ~ @ = ‘ [ ] { } <
> ’ “ ; : | \ and ?.

5.

Press the keyboard <Enter key>. The switcher checks to see if it is password
protected.

•

If the switcher is not password protected, proceed to step

7.

•

If the switcher is password protected, the Enter Network Password dialog box
opens (see figure 41 on the next page).

Advertising