Extron Electronics ISS 408 User Manual

Page 59

Advertising
background image

ISS 408 Integrated Seamless Switcher • Switcher Software

53

Figure 34.

Comm Port Selection Window

2.

Select the comm port that is connected to the ISS’s Remote port or select IP [LAN] and
click

OK

.

•

If you selected a comm port, proceed to step 5.

•

If you selected IP [LAN], proceed to step 3.

3.

If you selected IP [LAN] in step 2, the IP connection window appears (see figure 35).
The window displays the last IP address that this computer was logged on to via the
ISS/ISM Control Program. If no one has logged on to the ISS from this computer, enter
the ISS IP address. If the address has not been changed, the factory-specified default is
192.168.254.254.

Figure 35.

Address and Password Entry

4.

If you selected IP [LAN] in step 2, when prompted, enter the appropriate administrator
or user password and click Connect.

•

If you logged on using the administrator password, the program connects you to
the ISS with all of the administrator rights and privileges.

•

If you logged on using the user password, the program connects you to the ISS
with only user capabilities.

•

If an incorrect password was entered, the program beeps and returns to the
password entry display.

The Extron ISS/ISM Control Program window (see figure 36 on the next page) appears.

Advertising