Extron Electronics MSG0603 - Manual (Page 10)

8
MSC0603 OPERATION MANUAL - v1.0 5/7/02

2002 - INLINE, INC.
To configure a new input/output patch:
1. Press the desired output select button.
2. Press the input select button you want to connect to the output.
Example: To patch input 4 to output 2, press the Output 2 button followed by the Input 4
button.
To store a preset:
1. Configure all necessary input/output patches.
2. Adjust audio volume levels.
3. Press and hold the Preset button for 5 seconds.
4. Press the input or output button you want to use to designate as the preset number for
that configuration.
To recall a stored preset:
Press the Preset button, followed by an input or output button.
Switching and defining multiple groups is only feasible if you control the unit via RS-232.
Audio
The MSC0603 routes stereo audio along with the video. The audio for the selected input routes
to the selected output.
The MSC0603 has Volume Up and Down buttons as well as a Mute button. These buttons
function as follows:
Volume Up/Down - The Volume Up button increases the output volume; the Volume Down
button decreases it. The volume is increased/decreased for the currently selected output. The
output button’s LED flashes to indicate a change. The LED stops flashing upon reaching the
maximum or minimum level.
To adjust
output audio volume level:
Press the Volume buttons on the front panel to raise or lower the volume of an output.