Extron Electronics MS9200P User Manual
Page 74
HD Player
Chapter 12: Remote Control Protocols
74
Rev. 6.8
GetOutputResolution <channel>
This command is used to retrieve the current output resolution and frequency for the player.
The Player will respond with:
OutputResolution <channel> <string> <number>
Where string contains an entry from the Output resolution table and number contains an entry from the
frequency table (below). Example: outputresolution 1 1920 1080 i 59
SetOutputResolution <channel> <string> <number>
This command is used to set the output resolution and frequency for the player.
<String> is taken from the resolution table and must be a valid return option from the GetOutputResolution
command.
<Number> is taken from the frequency table and must be a valid frequency for the output resolution.
The resolutions (except video) must have either an I or P appended to the name to indicate Interlace or
Progressive.
Example: setoutputresolution 1 1920 1080 i 59 (string = resolution; from the table) (number = frequency; from
the table)
Resolution
Description
Freq.
23
Freq.
24
Freq.
48
Freq.
50
Freq.
59
Freq.
60
Video
Standard definition video
720x480
X
X
X
720x567
X
960x720
X
1024x768
X
1280x720
X
X
X
X
1280x1024
X
X
1440x1080
X
1600x1200
X
X
1920x1080
X
X
X
X
X
X
The Player will respond with:
OK or ERROR