Extron Electronics MS9200P - Manual (Page 76)

HD Player Chapter 12: Remote Control Protocols
76 Rev. 6.8
Playlist Commands
ClearPlaylist <string>
This command clears all the entries from the playlist identified by <string>.
The Player will respond with:
OK or ERROR
ListAllPlaylists
Returns a list of all the playlists stored in the server.
The player responds with a list of Playlist commands as follows:
laylist <string1>
Where <string1> identifies a playlist. The list is terminated with an empty Playlist message.
Example:
Playlist “Left Screen”
Playlist “Right Screen”
Playlist
AddPlaylist <string1> <mediapath> <clip>
Adds a clip identified by <clip> located in the media path identified by <mediapath> to the playlist identified by
<string1>.
The Player will respond with:
OK or ERROR
Example:
AddPlaylist “Left Screen” “/e/exhibits” “Main screen intro.mpg”
AddPlaylist “Left Screen” “/e/exhibits” “Main screen L.mpg”
The control system doesn’t need to terminate the playlist creation commands since the functionality is implied in
the command.
LoadPlaylist <Channel list> <string1>
Loads the playlist identified by <string1> onto the channels specified in <Channel list>. The clips specified in the
playlist must be available to all channels identified in <Channel list>.
The Player will respond with:
OK or ERROR