Extron Electronics MPX 866 A User Guide - Manual (Page 11)

Installation
This sections details the installation of the MPX 866 A switchers, including:
z z
Setup and Installation Checklist
z z Rear Panel Cabling and Features
z z Front Panel Configuration Port
Setup and Installation Checklist
Get Ready
c Familiarize yourself with the matrix switcher.
c Obtain IP setting information for the matrix switcher from the local network
administrator. Read “ Ethernet Connection ”.
Perform Physical Installation
c If desired, install the switcher in a rack ( page 126 ).
c Cable input and output (I/O) devices to the I/O ports ( page 7 ).
c As desired, connect computers, control systems, or both to the rear panel Remote ports
( page 11 ), LAN port ( page 12 ), and front panel Configuration port ( page 14 ).
c Connect power ( page 13 ).
c Test the switcher by creating a tie ( page 25 ).
Install Software
c Install the Matrix Switchers Control Program ( page 74 ).
MPX 866 A Media Presentation Matrix Switcher • Installation 6