Worksheet example 3: test configuration, Worksheet example 3, Test configuration – Extron Electronics MPX 866 A User Guide User Manual
Page 61: Figure 26. worksheet example 3: test configuration
Worksheet Example 3: Test Configuration
The A/V system in our fictional organization needs to be fine tuned on a regular basis.
Figure 26 shows a typical test configuration, with an Extron video test generator (inputs
8 and 13) connected to each video group. Each VTG generates a test pattern of the
appropriate resolution to all connected outputs. Sound checks are run from the CD player
(input 14) to two output devices that accept audio; the VCR (output 6) receives no audio in
this configuration. Note that the audio is redirected from the low resolution group to the
computer group.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
Preset #
Title:
Video:
Audio:
Fill in the preset number and use colors, or dashes, etc. to make connecting lines.
Indicate if the configuration is for video, audio, or both.
9
10
11
13
14
7
8
9
10
12
11
12
PC 1
RGB 201
16
System tune-up
PC 2
RGB 201
ISS 408 Wallbox
#1
Wallbox
#2
VTG
400
Camera/
mic
podium
Classrm
VCR #1
Classrm
DVD #1
Document
camera
VTG
400
Audio CD
Main
hall
PJ #1
Main
hall
PJ #3
Lobby
sound
Conf.
room
Sound
system
#1
VCR
(ISS 408)
Main
hall
PJ#2
Conf.
room
monitor
Classrm
#2
monitor
VCR
Computer video and audio subgroup input sources
Computer video and audio subgroup output destinations
Low resolution video and audio subgroup input sources
Low resolution video subgroup output destinations
Figure 26.
Worksheet Example 3: Test Configuration
MPX 866 A Media Presentation Matrix Switcher • Operation
56