Extron Electronics MPS 601 User Guide User Manual
Page 33
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Description
Information request
General information
I
In
X!
Vid•In
X!
Aud
•Ausw
X1^
•Vmt
X#
•Amt
X#]
Video input (1-6), Audio input (1-6),
Autoswitch status
X1^
, Video mute
status
X#
, Audio mute status
X#
.
Query model name
1I
MPS•601
]
Query part number
N
60-1337-01
]
Query firmware version
Query firmware version
Q/q
x.xx
]
Displays firmware version number to
the second decimal.
Query firmware version with
build
*Q/q
x.xx.xxxx
]
Displays firmware version and build
number to the fourth decimal.
Verbose mode
Set verbose mode
E
X3%
CV
}
Vrb
X3%
]
View verbose mode
E
CV
}
X3%
]
EDID Minder
Assign EDID to specific input
E
A
X!*X&
EDID
}
EdidA
X!*X&
]
X&
= 1 to 64
View EDID assignment
E
A
X!
EDID
}
X& ]
X&
= 1 to 69
Save display EDID to user
location
E
S
X&
EDID
}
EdidS
X&]
X&
= 66 to 69
View/Read EDID of input in hex
format
E
R
X!
EDID
}
X2)]
Read HEX data (as text) from
currently selected EDID.
View EDID native resolution
E
N
X!
EDID
}
X*
]
Read native resolution and refresh
rate from currently selected EDID.
Example: [email protected]
NOTES:
X!
= Video Input
1 to 6 for single input addressing.
X#
= Mute status
0= off/disabled, 1=on/enabled.
X&
= EDID memory slot number
From lookup table (see
1-64 = factory EDIDs,
65 = Output (autodetect),
66-69 = user loaded EDID slots.
Default:
Video
inputs
1 and 2=14
Video
inputs
3 to 6=56.
X*
= Native resolution and refresh
rate from EDID
X1^
= Auto-input switching mode
0= Disabled, manual switching (default)
1=on/enabled, priority to highest active input
2=on/enabled, priority to lowest active input.
X2)
= EDID hex value
EDID raw hex value: 128 or 256 Byte (text form).
X3%
= Verbose mode
0= clear/none
1=verbose mode (default)
2=tagged response for queries
3=verbose mode and tagged response for queries.
27
MPS 601 • Remote Communication and Control