Tools menu – Extron Electronics MPS 601 User Guide User Manual
Page 37
MPS 601 • Software Configuration and Control
31
Disconnect
This option disconnects the PCS program from the device.
From the
Connections
menu, click
Disconnect
. The MPS 601 is disconnected but the
PCS program remains open.
NOTE: If a device is already disconnected, the
Disconnect
option is disabled until the
device is connected.
Exit
This option disconnects the MPS 601 (if connected) and closes the application.
From the toolbar select
Connections
>
Exit
. The application closes.
Tools Menu
The
Tools
menu contains the update firmware option. To access this menu from the
toolbar, click
Tools
.
Figure 22.
Tools Menu
Update Firmware
This option uploads firmware from the host device to the connected device.
NOTE: If necessary, download new firmware from the Extron website (see
1.
From the toolbar, select
Tools
>
Update
Firmware
. The initial Update Firmware dialog
box opens asking permission to disconnect from the device.
Figure 23.
Update Firmware Dialog Box
2.
Click
Continue
to disconnect from the device and continue the firmware update. The
Update Firmware browser opens.
Figure 24.
Update Firmware Browser