Extron Electronics MPS 601 User Guide - Manual (Page 39)

MPS 601 • Software Configuration and Control 33
AV Controls Panel
The AV Controls panel (see figure 25, on left) selects between the connected input sources
and also can mute output audio, video, or both. The appropriate mute button turns red to
indicate a muted source (audio is muted in figure 28). Click a red mute button to unmute the
source. The button returns to gray.
Figure 28. AV Controls Panel Mute Buttons
NOTE: The AV controls panel can be hidden or revealed on any page by clicking on the
arrow button at the top right of the panel.
Configuration Pages
The Configuration tab global navigation bar has the following pages:
• Input/Output Configuration – Provides an overview of the current inputs and output
configuration (see
Input/Output Configuration on page 34).
• EDID Minder – Provides a list of EDIDs and their current assignments and allows
changing them (see
EDID Minder Page on page 35).
• Image Settings – RGBHV inputs only, provides configuration for the analog inputs to
optimize them for scaling (see
Image Settings Page on page 37).
• Audio Config – Select the mode of operation for the audio inputs (see Audio Config
Page on page 38).
• Device Settings – Selects the priority of auto input switching and sets the tally out LED
indicator (see
Device Settings Page on page 39).
In addition the AV Controls panel is always present.