Extron Electronics MLC 104 Plus Series Setup Guide - Manual (Page 24)

MLC 104 Plus Series • Software Setup
Software Setup
3-2
Creating a Global Configurator Project File
After you have installed Global Configurator (GC) software on
your PC, follow the steps in this chapter to configure your devices.
N For MLC 104 IP Plus models, use Global Configurator
version 2.2 or later. For MLC 104 Plus models, use
version 2.5 or later.
Step one: download device drivers
Software drivers for your audio/video devices are available free
from the Extron web site at www.extron.com .
To download device drivers:
1
. Click Start > Programs > Extron Electronics > GC2.X.X
or double-click the GC 2 icon on your desktop
to launch the Global Configurator application.
2 . Click the Add Driver Subscriptions button.
3
. Select a Manufacturer.
4 . Select a Device Type.