Software setup, cont’d – Extron Electronics MLC 104 Plus Series Setup Guide User Manual
Page 52
Advertising
MLC 104 Plus Series • Software Setup
Software Setup, cont’d
3-30
5
.
Select a subject port or device.
6
.
Select Available Options Lamp Usage: Value.
7
.
Select Is Greater or Equal in the Display: Lamp Usage
Value field.
8
.
Enter a number (hours) that is less than the lamp’s
anticipated burn-out spec in the Lamp Usage Value field.
9
.
Click Apply Condition.
10
. Click Next.
11
. Click Next a second time to add an e-mail notification.
12
. Select Email Messages Excessive Lamp Hours.
13
. Select the desired contacts.
14
. Click Apply Email/Contacts.
15
. Click Done.
Advertising