Extron Electronics MLC 104 Plus Series Setup Guide - Manual (Page 57)

MLC 104 Plus Series • Software Setup 3-35
Step eighteen: launch GlobalViewer
(IP models only)
GlobalViewer is a graphical user interface that is generated by
Global Configurator (GC). When a GC file is built and uploaded
to a GlobalViewer host device, you can launch the GlobalViewer
interface by opening an Internet browser and entering the host
device’s IP address in the browser's address field.
Once the GlobalViewer interface is launched, you can monitor
and control all of the devices on your audio/video network
from the GlobalViewer host device.
To launch GlobalViewer:
1
. Open an Internet browser.
N Internet Explorer 6.0 or later with Active X enabled is
required.
2 . Enter the IP address of a GlobalViewer host device in the
Address field, and press the keyboard's Enter key.
N You may also launch the GlobalViewer interface from the
Global Configurator Upload Manager screen by clicking
the Test GV System button.