Twisted pair cable termination, Eceiver (see – Extron Electronics MTP T 15HD A User Guide User Manual

Page 19

Advertising
background image

MTP T 15HD A Architectural Series • Installation

13

Twisted Pair Cable Termination

Figure 14 details the recommended termination of twisted pair cables with RJ-45
connectors in accordance with the TIA/EIA T568A or TIA/EIA T568B wiring standards. You
can use either standard with CAT 5, 5e, or 6 cable, but ensure that you

use the same

standard on both ends of the cable.

RJ-45

Connector

Insert Twisted

Pair Wires

12345678

Pins:

Pin

Signal

1

Red/V. sync +

2

Red/V. sync -

3

Green +

4

Blue/H. sync +

5

Blue/H. sync -

6

Green -

7

Mono audio +

8

Mono audio -

Wire color

White-green

Green
White-orange
Blue
White-blue
Orange
White-brown
Brown

Wire color

TIA/EIA T 568 A TIA/EIA T 568 B

White-orange

Orange
White-green
Blue
White-blue
Green
White-brown
Brown

NOTE: When using Enhanced Skew-Free

AV UTP cable, use the TIA/EIA T568A
standard only.

Figure 14.

Twisted Pair Cable Termination Diagram

NOTES:

•

RJ-45 termination with CAT 5, 5e, or 6 cable must comply with the TIA/EIA T568A
or TIA/EIA T568B wiring standards for all connections.

•

RJ-45 termination with Skew-Free AV UTP cable must comply with TIA/EIA T568A
only.

•

The audio data that is carried on wire pair 3 and 6 is incompatible with the Extron
TPX 88 A, which cannot switch the audio, output it locally, or break it away.

•

Extron Enhanced Skew-Free AV cable is not recommended for
Ethernet or LAN applications. This cable is specially designed for compatibility with
Extron Twisted Pair products that are wired using the TIA/EIA T568A standard.

•

The green, brown, and blue wire pairs of this cable have virtually identical
lengths and should be used to transmit the RGB signals.

•

The orange wire pair of this cable has a different length and should not be used
to transmit the RGB signals.

Advertising