Extron Electronics MTP T 15HD A User Guide - Manual (Page 21)

MTP T 15HD A Architectural Series • Reference Information 15
Reference
Information
This section includes a template with cut-out dimensions for installation of the MTP T 15HD
A WM or MTP T 15HD A D transmitter.
Decora Template Dimensions
Use the dimensions in the cut-out template in figure 16 as a guide for cutting a hole in a wall
or furniture.
NOTES:
• The drawing is not full size or to scale. DO NOT scale up or print to use as a
template.
• Full size templates are available online at www.extron.com .
4.50"
(11.43 cm)
Top
Panel
SURFACE CUT-OUT
AREA FOR
FURNITURE MOUNT
2.79"
(7.09 cm)
1.9"
(4.83 cm)
2.8"
(7.1 cm)
To install a
1-gang
MTP T 15HD A WM
directly into
furniture or
wall, cut along
this line.
Figure 16. 1-gang Cut-out Template