Control buttons, Control buttons -5, Preliminar y – Extron Electronics MTPX Series User Guide User Manual

Page 31

Advertising
background image

3-5

MTPX Twisted Pair Matrix Switchers • Operation

PRELIMINAR

Y

Control buttons

N

See “Front Panel Operations”, later in this chapter for detailed descriptions of

the following operations.

Primary functions

Action:

Save changes

Select Preset mode

Select View mode

Cancel/escape

Indication:

Blink

: save needed

Blink

: Save preset

Lit

: Recall preset

View

mode selected

Flashes once

ENTER

PRESET

VIEW

ESC

Secondary functions

Port and input

configuration

Action 1:

Select Configuration mode

Action 2/
indication:

Select 9600 baud.

Blink

: selected

Select 19200 baud.

Blink

: selected

Select 38400 baud.

Blink

: selected

Select 115200 baud.

Blink

: selected

Front panel

locks

Action:

With Video and

Audio, select Lock

mode 2 and/or

toggle between

mode 0 and mode 2.

Audio

Action:

In Audio mode,

decrease input level

or output volume.

In Audio mode,

increase input level

or output volume.

d

Enter button and LED — The Enter button and LED have three primary

functions (•) and three secondary functions (❏):
• Saves changes that you make on the front panel. To create a simple

configuration:

Specify video, audio, or both (see I/O buttons [

h

] and [

i

]).

Press the desired input button (

a

).

Press the desired output button(s) (

b

).

Press the Enter button.

• Indicates that a potential tie has been created but not saved.
• Indicates that a global preset has been selected to be saved or recalled but

that the preset action has not been accomplished.

❏

With the Preset, View, and Esc buttons, selects Serial Port and Audio/

RS-232 Input Configuration

mode. See “Selecting the rear panel Remote

port protocol and baud rate” on page 3-42.

❏

Selects 9600 baud for the rear panel Remote port in Serial Port and

Audio/RS-232 Input Configuration

mode and indicates the selection.

See “Selecting the rear panel Remote port protocol and baud rate” on

page 3-42.

❏

With the Video and Audio buttons, selects front panel security lockout

mode 2 or toggles between mode 0 (unlocked) and mode 2. See “Setting

the front panel locks (Executive modes)” on page 3-40.

Advertising