Extron Electronics PS 124 - Manual (Page 18)

PS 124 12 VDC, 4 Amp Power Supply • Installation Manual
PS 124, cont’d
12
Above-projector mounting
PMK 350
The PMK 350, (part #70-563-03), is an above-projector mounting
kit that attaches to a 1" to 2" diameter projector mounting pole
(figure 11). It can hold multiple devices in a variety of sizes.
N These instructions are for the PMK 350. If another
above‑projector mounting is used, follow the installation
instructions for that kit.
RED- OV ERLO AD
P/S 12
4
12 VDC 4A PO
WER SUPPL
Y
BA SS
LEVEL
TREBLE
MINI PO
WER AMP
LIFIER MP A 122
ON
OFF LIMITE R
STEREO
DUAL MONO
Extron
PMK 350
Multi-product Projector
Mounting Kit
Extron
PS 124
12 VDC 4 A
Power Supply
Cover Shee t
Front Plate
Rear Plate
U-bolt
Extron
IPL T S2
Ethernet Control
Interface
Extron
MPA 122
Mini Power Amplifier
COM 1
LA N UID# 0930
12052
PO WE R
12V .5A MA
X
COM1
TX RX TX RX
COM2
COM 2
Figure 11 — Projector mounting the PS 124
To mount the PS 124 onto the PMK 350 bracket:
1
. Remove the front and rear plates from the PMK 350
(figure 11). Retain the screws to reattach the plates.
2 . If necessary, remove the feet from the bottom of the PS 124.
3 . Secure the unit to one side of the mounting tray, using two
of the 4-40 x 3/16" screws in opposite (diagonal) corners.
4 . Place the PMK 350 around the projector ceiling mounting
pole (figure 11, above).