Operation, Front panel overview, Ef g – Extron Electronics PVS 405D User Guide User Manual

Page 14

Advertising
background image

Operation

This section of the manual discusses the operation of a PVS 405D device.
Topics covered include:

•

Front Panel Overview

•

Configuration

•

Resetting the Switcher

•

Front Panel Lockout (Executive Modes)

•

Power Save Modes

•

Setting Up and Optimizing the Audio

Front Panel Overview

PVS 405D

POLEVAULT SWITCHER

AUDIO LEVEL ADJUST

INPUTS

1
2

SELECT

CONFIG

R

PEAK
NORMAL
SIGNAL

INPUT

3
4

5

AUX

AUDIO

PEAK
NORMAL
SIGNAL

VOICELIFT

PAGING
SENSOR

SENSITIVITY

3

9

8

4

2

1

11

10

13

12

6

5

7

Figure 6.

PVS 405D Front Panel Features

a

Status LED — This LED lights green when powered up, and amber when in power

save mode.

b

Device Reset button — Pressing this inset button resets the switcher to default

settings. There are two reset modes. See

“Resetting the Switcher”

on page 10

for

details.

c

Front panel mini USB configuration port — Connect a computer to this mini

USB port (cable not supplied), for device configuration, control, and upgrading the
firmware.

d

Input selection button — Pressing this toggles through and selects inputs 1‑5 and

the Aux input.

e

f g

Input selection LEDs (1-4, 5, Aux) —

The applicable input LED lights green

when that input is selected and active.

Inputs 1 - 4 — Inputs 1 through 4 are HDMI with embbedded audio, or high
resolution RGB signals input via the PVT wallplates. The analog RGB signal is digitized
at the wallplate.

Input 5 — Input 5 is a dedicated‑audio only input for an auxiliary, stereo, line‑level
analog audio signal from an output source such as an iPod device or an MP3 player.

NOTE: Input 5 is audio only. No video signals are supported on this input.

Aux Input — This input is mono analog audio only.

h

Audio input level adjustment encoder — Use this encoder to adjust the input

levels through 43 positions per rotation in 1 dB steps (‑18 to +24 dB, default 0).

i

Audio input level adjustment LEDs — These three LEDs indicate the active audio

level (peak, normal and signal). See

”Setting Up and Optimizing the Audio”

on

page 12 for details.

PVS 405D Switcher • Operation

8

Advertising