Extron Electronics PVS 405D User Guide - Manual (Page 45)

Assigning EDIDs
To assign EDID to selected inputs:
1. From the inputs screen (table of inputs) on the right, select the desired input or inputs
(see figure below).
2. From the table, select an available EDID (represented by a blue, green, or yellow
output display icon).
3. Click the Assign button to assign EDID to the selected input or inputs.
Figure 20. Assigning EDIDs
NOTE: If you do not select any inputs but still click Assign, an error message is
displayed.
To assign EDID to all inputs:
1. From the EDID table, select an available EDID (represented by a blue, green, or yellow
output display icon).
2. Click the Assign All button.
NOTE: If you select Assign All, all input boxes, checked or unchecked, will be
ignored and the EDID will be assigned to all inputs.
PVS 405D • Using Extron Product Configuration Software 39