Extron Electronics SMD 101 User Guide - Manual (Page 15)

D IR Receiver Window— Allows remote operation using an optional compatible IR hand
control.
E Config port — Connect a control PC or other USB device to this port using a
mini-B USB cable (not supplied). Use this port to send Simple Instruction Set (SIS)
commands to the SMD 101 for device configuration and control.
• For information on connecting a control PC or other USB device to this port, see
the
Front Panel Configuration Port section on page 58.
• For information on SIS commands, see Remote Communication and Control on
page 57.
Rear Panel Features
The rear panel of the SMD 101 is shown in figure 3 below.
12V
1.0A MAX
POWER
HDMI
L R
AUDIO
Tx Rx G S G
RS-232 RESET IR IN
LAN
OUTPUTS
G G A A B B C C D D E E F F
A 12 VDC Power connector E RS-232 connector (optional)
B HDMI output connector F Reset button and LED
C Analog audio output connector G RJ-45 LAN connector
D IR input connector
Figure 3. SMD 101 Rear Panel
SMD 101 • Panels and Cabling 9